Full-face respirator AG700

Two filter systems, one full-face mask that always fits

The AG700 has two bayonet connections at the sides and an RD40 round thread in the centre. Before use you choose one option: either two identical bayonet filters or one RD40 filter. The unused connection stays closed with its cap; according to the instructions for use, both systems are never open at the same time.

AGP3R1, AGP3R2, AGA1E1, AGABEKK1 and AGABEKK1P3 fit the bayonet connections, AGP3R, AGA2E2, AGABEK2 and AGABEK2P3 the RD40 thread. More about the connections under Bayonet or RD40.

Up to 400 times the limit value

With a P3 filter or gas filter, a full-face mask is permitted up to 400 times the workplace exposure limit under DGUV Rule 112-190, a half mask only up to 30 times. Class 2 gas filters, permitted up to 0.5 % by volume gas concentration, are only available in the range with an RD40 thread, that is, for the AG700.

Vision and fit

The panoramic visor gives a wide field of view. The head harness is adjusted in two levels: upper first, then lower, until the mask sits firmly and seals. Normal glasses arms lie in the sealing line and disturb the face seal; talk to us if employees need vision correction.

Cleaning and storage

After every use, clean and disinfect inside and out: under running warm water up to 50 °C with mild detergent and a soft brush or sponge. According to the instructions for use, do not use alkaline soap or washing powder. Dry in the air or with a microfibre cloth.

Store the mask so that it does not deform, protected from dust, sunlight, extreme temperatures, moisture and chemicals, for example in a plastic container with a lid. Check masks that are kept ready at least once a month. For the mask body the instructions for use state a shelf life of three years if stored correctly.