DE
AGA1E1Combination filter, bayonet

Combination filter A1E1P3 R D

Gas and particle filter in one: A1 against organic gases and vapours with a boiling point above 65 °C, E1 against acid gases such as sulphur dioxide and hydrogen chloride, plus a P3 particle filter. For the half masks AG360 and AG360W and the side connections of the full-face mask AG700.

Marking
A1E1P3 R D
Standard
EN 14387:2004+A1:2008
Connection
Bayonet
Fits
AG360/W and AG700
PPE category
III, CE 2834
Packaging
25 pairs
View in the B2B shopRequest a quoteRequest samples

Data sheet (PDF)Ask for advice

Warnings

  • Replace gas filters according to a change schedule, at the latest when odour, taste or irritation is noticed. Then leave the area immediately.
  • Do not use filters containing activated carbon for firefighting, near open flames or with molten metal splashes.
  • Filters do not supply oxygen: do not use where the oxygen content may be too low (below 19.5 % by volume according to the instructions for use), in tanks, pits, shafts and confined spaces, or if the substance and its concentration are not known.
  • Use only with the AirGuard Pro masks named in the documents.

The instructions for use of the product are authoritative.

AirGuard Pro Combination filter A1E1P3 R D AGA1E1

When A1E1P3 fits

When particles occur as well as solvent vapours or acid gases, for example spray mist. Gas class 1 is permitted up to 0.1 % by volume gas concentration (1,000 ml/m³). The filter does not protect against inorganic gases (type B) and ammonia (type K); for these there is the AGABEKK1P3.

With the half mask AG360 the filter is permitted up to 30 times the workplace exposure limit under DGUV Rule 112-190, with the full-face mask AG700 up to 400 times. How the protection level is calculated is explained under Half mask or full-face mask.

R and D

R indicates that the particle filter may be used beyond one shift, D that it passed the dolomite dust test and clogs more slowly. According to the instructions for use the filter can be kept airtight until the next shift and is disposed of after the second shift.

Replace the gas filter part according to a change schedule, at the latest when odour, taste or irritation is noticed. How a change schedule is drawn up is explained under Changing filters.

Using correctly

  1. 01

    Open only at the place of use

    Take the filter out of its packaging immediately before use and check the expiry date on the filter.

  2. 02

    Fit in pairs

    Place two identical filters on the bayonet connections of the mask and turn until they sit firmly.

  3. 03

    Check the face seal

    Place the palm of your hand over the exhalation valve and exhale slowly. If air escapes at the edge of the mask, reposition it and tighten the straps. Before every use.

  4. 04

    Replace in good time

    According to the change schedule, at the latest when odour, taste or irritation is noticed. Replace the filter too if breathing becomes harder. Always replace both filters together.

When filters are replaced

Technical data

Technical data AGA1E1
Article numberAGA1E1
TypeCombination filter
StandardEN 14387:2004+A1:2008
MarkingA1E1P3 R D
Gas filterType A and E, class 1 (up to 0.1 % by volume)
Particle filterP3
ConnectionBayonet connection, two filters
FitsAG360, AG360W and AG700
PPE categoryIII under Regulation (EU) 2016/425
Notified bodyCCQS Certification Services Limited, 2834
EU type examinationCE-PC-240129-058-06-9A of 24 Oct 2024
Packaging25 pairs

Downloads

Instructions for use on request: Request documents

Frequently asked questions

What does A1E1P3 R D mean?

A1: organic gases and vapours with a boiling point above 65 °C, class 1. E1: acid gases such as sulphur dioxide, class 1. P3: particle filter of the highest class. R: reusable beyond one shift. D: dolomite dust test passed. The colours are explained under Filter classes and colours.

Does the A1E1P3 protect against ammonia?

No. Against ammonia you need a filter with type K, in the bayonet range AGABEKK1 or AGABEKK1P3.

How long does the filter last?

According to the instructions for use until the second shift, airtight in between. The gas filter part is replaced according to a change schedule, at the latest when odour, taste or irritation is noticed.

Goes with it

To the respirator finder

The brand family of DS SafetyWear Arbeitsschutzprodukte GmbH