Disposable respirator FFP3, Fish Snap, with valve

FFP3 mask 6312 Fish Snap

Disposable particulate respirator of class FFP3 NR in Fish Snap shape with exhalation valve, tested to EN 149:2001+A1:2009. Permitted up to 30 times the workplace exposure limit.

Class
FFP3 NR
Standard
EN 149:2001+A1:2009
Protects up to
30× AGW
Valve
yes
PPE category
III, CE 0370
Packaging
25 per box in a foil bag

Data sheet (PDF)Instructions for use (PDF)Ask for advice

Warnings

  • Protects only against particles (dust, smoke, mist), not against gases and vapours.
  • The exhalation valve lets exhaled air escape unfiltered: do not use where the surroundings must be protected from the wearer.
  • Wear for one working shift at most (NR), then dispose of it. If breathing resistance becomes noticeably high, replace the mask at once.
  • Oxygen content at least 17 % by volume. The type and concentration of hazardous substances must be known. If there is a risk of oxygen deficiency, too high a concentration or unknown conditions, use breathing apparatus that is independent of the ambient air.
  • Do not use with a beard, sideburns or deep scars in the sealing area. Check the face seal every time you put the mask on.

The instructions for use of the product are authoritative.

AirGuard Pro FFP3 mask Fish Snap with valve 6312, white

Fish Snap design: more room for high wearing comfort

Wearing comfort starts with the shape of a respirator. The Fish Snap design unfolds into a three-dimensional fish shape that creates space in front of mouth and nose. This room can reduce contact of the mask material with the lips and make speaking more pleasant, especially for work that involves regular communication.

The three-part fold allows the nose and chin areas to follow the contours of the face. At the same time it allows freedom of movement for natural jaw movements. With the right size and correct fit this results in a less restricted feel. Especially when respiratory protection is worn regularly, these properties can make a noticeable difference in everyday work.

FFP3 in Fish Snap shape

The 6312 is an FFP3 mask in Fish Snap design with an exhalation valve. Particle protection is the same as for any FFP3 mask: permitted up to 30 times the workplace exposure limit under DGUV Rule 112-190. The design differs from the cup shape of the 6311; which fits better depends on the face shape. That is why samples are available for a wearing trial.

Trying the fit

A good face seal is decisive for disposable masks. Let employees with different face shapes test different designs and check the seal as described. You can request samples directly; more on the subject under Face seal and beards.

Packaging and storage

25 masks per box in a foil bag. Storage in the original packaging at room temperature, protected from sunlight.

Limits and alternatives

Above 30 times the limit value, when eyes need protecting or against gases the mask is not suitable. Then the half mask AG360 or full-face mask AG700 with the right filters is the right choice.

Putting on and checking the face seal

  1. 01

    Put on the mask

    Place the mask over nose and mouth and guide the straps over the head as shown in figures 1 to 5 of the instructions for use.

  2. 02

    Adjust the nose clip

    Press the nose clip exactly over the nose and squeeze it gently until the mask fits snugly.

  3. 03

    Check the face seal

    Cup the mask with both hands and exhale forcefully. If air escapes at the nose, press the clip down harder, otherwise move or shorten the elastic bands.

  4. 04

    Wear for one shift

    Wear the mask for one working shift at most. If breathing becomes harder, replace it at once and start again with a new mask.

Face seal and beards: what matters

Technical data

Technical data 6312
Article number6312
TypeDisposable respirator, filtering half mask
ClassFFP3, marking FFP3 NR
Colourwhite
DesignFish Snap
Exhalation valveyes
StandardEN 149:2001+A1:2009
Protection levelup to 30 times the limit value (DGUV Rule 112-190), particles only
Wearing timenot reusable (NR), one working shift at most
Shelf life5 years in the original packaging if stored correctly, according to the instructions for use
PPE categoryIII under Regulation (EU) 2016/425
Notified bodyAPPLUS, no. 0370
Packaging25 per box in a foil bag

Frequently asked questions

What does Fish Snap mean?

The name describes the design of the mask, which the shop lists alongside FFP3 NR and exhalation valve. How the mask sits on the face is best checked with a sample.

Up to what concentration does the mask protect?

Up to 30 times the workplace exposure limit (DGUV Rule 112-190), like any FFP3 mask.

How long may I wear the mask?

One working shift at most (NR). If breathing resistance becomes noticeably high, replace it at once.

Which notified body tested the mask?

According to the instructions for use the mask was tested by the notified body APPLUS, identification number 0370. The declaration of conformity is under Data sheets.

How many masks are in one pack?

25 per box in a foil bag.

The brand family of DS SafetyWear Arbeitsschutzprodukte GmbH